Turning over sling_Zhengzhou Hengxing Heavy Equipment Co.,Ltd

PRODUCTS CATEGORY

NEW PRODUCTS

Tel: 0086-371-67858720

E-mail: sales006@zzhxmachine.com

Add: No.8 Honegy Road, High-tech development Zone

Turning over sling

Overturn sling brief introduction:
Overturn sling is one of main equipment of AAC production line. It is used to overturn green cake(with mould & side plate) 90 degree in air, and hoist to cutting platform or cutting cart, and demould.

Inquiry Now
Feature and benefits Products's AdvantagesSpecificationsInquiry

Overturn sling brief introduction:

Overturn sling is equipped with crane for mould demoulding & cake transporting. It’s more stable comparing to ground turning type sling.

Turning over sling

If the overturn sling does not overturn well, firstly the screw nut should be adjusted, and then check following part:
1.transmission device, if it do not lubricate well, lubricate oil should be added to active joint.
2.the indicative mark on the overturn sling should be repainted if indicative mark fade.
3.steel wire rope on the overturn sling should be cleared & lubricated regularly.
4.For bearing parts, rings, twistlock, Ear plate, lockset, shackle should be checked every 3 months for crack & distortion.
5.All grease cup, includes ratchet mechanism cup, sliding bearing pedestal cup & twistlock box cup and all active joint should be lubricated according to situation.
6.Overloading is not allowed. The overturn sling should be operated smoothly, no collision with other equipment.

Turning over sling

No.

Spec

Loading weight

1

4M

2×4t

2

6M

2×6t

*E-mail
*Content
Product Name
Your Name
Company
Tel/Fax
Msn/Skype
Send Message