Air turn over cutting machine_Zhengzhou Hengxing Heavy Equipment Co.,Ltd

PRODUCTS CATEGORY

NEW PRODUCTS

Tel: 0086-371-67858720

E-mail: sales006@zzhxmachine.com

Add: No.8 Honegy Road, High-tech development Zone

Air turn over cutting machine

Air turn over cutting machine

AAC cutting machineinclude air turning cutting machine and ground turning cutting machine.theirproduction technology & equipment configuration are different, but cuttingtechnique are the same. Air turning cutting machine, also called step movablecutting machine, is the main equipment in AAC production.


Inquiry Now
Feature and benefits Products's AdvantagesSpecificationsInquiry

Air turn over cutting machine

The tilting crane in AAC production line turns the mould 90 in the air, demoulds the cake and puts it on the cutting table together with the side plate. The cutting cart driven by the motor runs slowly through the vertical cutting device, and runs to the horizontal cross-cutting support falls down from the top to make horizontal cutting until the reset upward.

The features of cutting machine:
1.Simple and practical in structure, and easy to install and maintain.
2.Placing the green body in edge-on(width:600mm,height:1200mm),Steel wire is short, which is not easy to be snapped, wandering.High precision in cutting.
3.Fixed lengthwise cutting equipment, driving the cart to complete the lengthwise cutting,short time for cutting.The transverse cutting machine finish the whole cutting process.
4.With the green body siding for lengthwise cutting,complete the slot drills without additional slot processing equipment.
5.The green body will be cut in six sides by aerated concrete cutting machine,and the product quality will be free from molding oil or deformation of moulds.
6. Beside producing blocks, the aerated concrete cutting machine can produce plates as well.
7.The cutting process(overturn,lengthwise cutting and across cutting) shall be finished in different service positions which are simple for operation

No.

Name

Unit

Index

Remarks

1

Capacity

10000m3/year

5-15

Annual output

2

Size of the cake

M

6×1.2×0.6

net

3

Cutting cycle

mm

5/10

Vertical cutting/cross cutting

4

Cutting precision

mm

±3±1.5±1.5

Length,width,height

5

Production cycle

mln/ mould

5

6

Quality of the master cutting machine

t

12

Vertical cutting/ cross cutting

7

Installed capacity of the master cutting machine

KW

11.4

Including hydraulic station


*E-mail
*Content
Product Name
Your Name
Company
Tel/Fax
Msn/Skype
Send Message